Visit Our Website

 

 

On this page in the next paragraph you will discover additional helpful facts related to What Would Cause My Electric Water Heater to Stop Working?.

Numerous modern-day houses utilize an electric hot water heater for their heating unit, due to its convenience and also convenience of use. However, just like any other electric home appliances, troubles might occur with its use, all of a sudden. It can be actually frustrating to awaken to a cool shower instead of a hot one or having your bathroom with water that isn't hot sufficient or perhaps as well warm. Whatever the situation might be, water heater problems can be fairly nerve-racking. The good news is, we have actually made a list of possible remedies to your water heater concerns. There are a number of variables that can trigger many of these issues, maybe an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you turn off the major power supply for safety. Whatever the issue is, getting it dealt with must not position way too much of an issue if you comply with these actions:

 

Call A Professional:

If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you might need to call a specialist plumber for a professional opinion. The issue with your heating unit could be that the cold and hot taps have been changed or it might be undersized for the amount of hot water required in your house. Whatever the situation may be, a professional plumber would certainly aid fix the problem.

 

Check Your Power Supply:

As standard as this might seem, it is very necessary. Without adequate power, your hot water heater will certainly not function. So the first thing to do when your water suddenly retires is to validate that it isn't a power issue. Inspect if the fuse is blown out or the breaker stumbled. If the circuit breaker is the issue, merely transform it off and on again. Replace any kind of busted or worn-out fuse. Test the home appliance with power after these modifications to see if it's now working.

 

Inspect Your Thermostat:

If your water heater still isn't working or the water appearing isn't warm sufficient, you might require to examine the temperature level setups on your top thermostat. Make sure the circuit breaker is switched off before doing anything. Open the access panel and also press the red switch for temperature level reset over the thermostat. This must help heat the water. Transform the breaker back on and also inspect if the issue has been settled.

 

Examine the Burner in the Hot Water Heater:

If it's not a power issue, then attempt having a look at your heating element if it is still functioning. Examine each of your burner to make sure the problem isn't with any of them. If any one of them is defective, replace that component and afterwards inspect whether the hot water is back on.

 

Conclusion

Hot water heater issues are not always major. Most of them are because of minor concerns like a blown fuse or worn-out heating element. Replacing the faulty components ought to suffice. Nevertheless, if you are still incapable to resolve the trouble, give a call to your closest plumber ahead to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you enjoyed our topic about What Would Cause My Electric Water Heater to Stop Working?. Thanks a ton for spending some time to read our post. Enjoyed reading our blog posting? Please share it. Help somebody else check it out. I treasure reading our article about Hot Water Heater Repair.

See Availability